Skip to content

How to Charge Your Solar-Powered Watch

To ensure your solar watch maintains optimal performance, always expose the dial directly to a light source for charging. Even if the watch appears to have sufficient power, we recommend regular monthly charging to keep the battery level full and extend its overall lifespan. Below are different charging scenarios under various light sources, along with key points to note:

Effective Charging Conditions ✓

Outdoors (Direct sunlight on a clear day)

Scenario: Outdoors (Direct sunlight on a clear day)

Illuminance(lx): 100,000

Exposure Time: 4–6 hours

Charging Efficiency: ★★★★★

By a window (Direct sunlight on a clear day)

Scenario: By a window (Direct sunlight on a clear day)

Illuminance(lx): 30,000

Exposure Time: 6–8 hours

Charging Efficiency: ★★★★☆

30W Fluorescent Light

Scenario: 30W Fluorescent Light

Illuminance(lx): 10,000

Exposure Time: 8–10 hours

Charging Efficiency: ★★★☆☆

⚠️ Reminders:

  • Avoid overheating the watch during charging. (Operating temperature range: -10°C to +50°C)
  • Make sure the dial, especially the chronograph sub-dials, is fully exposed to light when charging.
  • When using the watch for the first time or restarting it after it has stopped due to low power, please refer to the "charging time guide" below to ensure the watch is fully charged before use.

Ineffective Charging Conditions ✘

Watch covered by a sleeve

Scenario: Watch covered by a sleeve

Illuminance(lx): 0

Exposure Time: N/A

Charging Efficiency: Ineffective

Watch stored in a drawer

Scenario: Watch stored in a drawer

Illuminance(lx): 0

Exposure Time: N/A

Charging Efficiency: Ineffective

On an office desk

Scenario: On an office desk

Illuminance(lx): 500-700

Exposure Time: N/A

Charging Efficiency: Ineffective

⚠️ Your watch may stop working if:

  • It is consistently covered by your sleeve during wear.
  • It is used or stored in environments without exposure to light for extended periods.
  • It relies solely on typical office lighting, which usually ranges from 500 to 700 lux depending on the type and height of the ceiling lights. This level of brightness is generally insufficient for stable charging over time.

Charging Time Guide

Illuminance
lx (Lux)
Light Source Condition (Example) Charging from a fully depleted state
Time to Full Charge Time to Resume 1-Second Movement
700 Fluorescent Light Standard Office - -
3,000 Fluorescent Light 30W / 20cm distance 80 hrs 6 hrs
10,000 Fluorescent Light 30W / 5cm distance 40 hrs 2 hrs
30,000 Sunlight Sunny window side 8 hrs 1 hr
100,000 Sunlight Direct sunlight (outdoors) 6 hrs 30 min

Key Points

  • Place the watch under direct bright sunlight for optimal charging performance. Charging may be ineffective on cloudy days.
  • Avoid exposing the watch to high temperatures for extended periods.
  • Check the charging status regularly to ensure the watch operates normally.

Video Tutorial